Treasure Finder Remote Search High Accuracy Metal Locator Multi Purpose Handheld for Treasure Hunting for Security Inspections

1. Metal Detector: The detector has high sensitivity and stability, can identify different types of metals, and accurately determine the location of objects.
2. Multi Purpose: You can use metal detectors to explore more places to find treasures, find gold, silver, copper and gems, and improve the efficiency of treasure hunters.
3. Microelectronic Processor: The microelectronic processor controls the chip unit calibration and instrument self checking system, which can scan easily and quickly.
4. Remote Search: A specific type of metal can be identified through a frequency regulator; it has a remote search system and an accurate position detection system.
5. Wide Detection Range: The detection range can 10000m, and the underground detection depth can 30m. Widely used in security inspections, archaeological treasure hunting, etc.

Specification:

Item Type: Metal Detector
Material: Aluminum Alloy + ABS
Battery:
Transmitter 12V 1600 mAh Rechargeable Lithium Battery (Built in Battery)
Receiver 12V 1000mAh Rechargeable Lithium Battery (Built in Battery)
Uses: It is widely used in security inspections, archaeological treasure hunting, and mineral prospecting.
Basic Parameters:
1. Search Range: Approx. 10000M / 32808ft
2. Detection Depth: Approx. 30M / 98ft
3. Transmission Frequency: 5.6-6KHz
4. Frequency: 360-440Hz

Package List:

1 x Transmitter

1 x Receiver

8 x Bar (Long)

3 x Bar (Short)

1 x Power Adapter

2 x Key

1 x Suitcase

1 x Manual

Note:

If you feel that there is a certain deviation in the measured position, you can determine it from another point of view. If the target is within 10 meters, you will slowly and steadily follow a prescribed route. When you pass the target and you are directly above it, the antenna of the instrument will shake on both sides. The position measured at this time is very accurate. (For specific operation instructions, please refer to the manual.) The product has its own degaussing function (as long as the probe of the receiver is close to the ferrous metal, the alarm will be three times to degauss)